Note
●
If [ALM] remains on the display, it
means that at least one alarm is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the [ALM]
indicator is no longer displayed.
Adjusting Time
Settings Manually
When there is no communication with a mobile
phone, the time and date can be adjusted with
the procedure below.
Setting a Home Time City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
configure a summer time setting.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3.
Use (B) and (E) to change the Home City
setting.
●
For details refer to the information
below.
l
4.
Press (D).
5.
Use (E) to change the summer time
setting.
Each press of (E) cycles through settings
in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
6.
Press (A) to exit the setting screen.
Setting the Time/Date
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3.
Use (D) to display the setting you want to
change.
●
Each press of (D) cycles through
settings in the sequence shown below.
Power Saving
Auto adjust
Illumination duration
Auto Light enable/disable
Operation tone enable/disable
Day of the week language
Date display format
12/24-hour timekeeping
Day
Month
Year
Minutes
Hours
Seconds
Summer time
Home City
Operation Guide 5631
14
