3
Operation Guide 5083 (OC)
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds to Newfoundland.
In the Timekeeping Mode, keep
1.
A
depressed (for about fi ve seconds) as the
x
Second Hand
goes through the following sequence.
Moves to
YES
(or
Y
for some models) or
NO
(
N
) to indicate the last signal
reception result, then to
READY
(
R
), and then to the city code of the currently
selected Home City.
This is the city code setting mode.
The watch will exit the setting mode automatically if you do not perform any
operation for about two or three minutes.
For details about city codes, see the “City Code Table”.
To change the Home City setting, press
2.
D
to move the
x
Second Hand
clockwise.
Keep pressing
D
until the
x
Second Hand
is pointing at the city code you
want to select as your Home City.
Each time you change the city code setting, the
z
Hour Hand
,
c
Minute
Hand
and
n
Day
move to the current time and date for that city code. Do not
perform the next operation until these hands stop moving.
Press
3.
B
to toggle the time for the currently selected city code between
STD
(standard time)/
DST
(daylight
saving time).
While you are selecting the Home City code, the
v
Left Dial Hand
will indicate whether the currently
selected city code is confi gured for standard time (
STD
) or daylight saving/summer time (
DST
).
Note that you cannot switch between
STD
(standard time)/
DST
(daylight saving time) while
UTC
is
selected as your Home City.
After all the settings are the way you want, press
4.
A
to return to the Timekeeping Mode.
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings”.
1.
Each time you select a city code, the
z
Hour Hand
and
c
Minute Hand
move to the current time for that
city code. Do not perform the next operation until these hands stop moving.
While you are selecting the Home City code, the
v
Left Dial Hand
will indicate whether the currently
selected city code is confi gured for standard time (
STD
) or daylight saving/summer time (
DST
).
Press
2.
B
to toggle the time for the city code of the currently selected Home City between
STD
(standard
time)/
DST
(daylight saving time).
Note that you cannot switch between
STD
(standard time)/
DST
(daylight saving time) while
UTC
is
selected as your Home City.
After the setting is the way you want, press
3.
A
to return to the Timekeeping Mode.
Note
After you specify a city code, the watch will use UTC* offsets to calculate the World Time based on the
current time in your Home City.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The reference point for
*
UTC is Greenwich, England.
Selecting some city codes automatically makes it possible for the watch to receive the time calibration
signal for the corresponding area. See “Radio Controlled Atomic Timekeeping” for details.
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable to receive a time
calibration signal.
To change the current time setting manually
In the Timekeeping Mode, keep
1.
A
depressed (for about fi ve seconds) as the
x
Second Hand
goes through the following sequence.
Moves to
YES
(or
Y
for some models) or
NO
(
N
) to indicate the last signal
reception result, then to
READY
(
R
), and then to the city code of the currently
selected Home City.
The
v
Left Dial Hand
will indicate whether the currently selected city code is
confi gured for standard time (
STD
) or daylight saving/summer time (
DST
).
Change the Home City and daylight saving time (DST) settings, if you want.
2.
For details about these settings, see steps 2 and 3 under “To confi gure Home
City settings”.
In the following steps, each press of
C
cycles between settings as shown
below.
Home city/DST
Hour/Minute
Year
(tens digit)
Day
Month
Year
(ones digit)
Press
3.
C
.
The
v
Left Dial Hand
will move to 12 o’clock. This is the time setting mode.
The
x
Second Hand
indicates whether the current time is a.m. (
A
) or p.m. (
P
).
Use
4.
D
(+) and
B
(–) to change the time (hour and minute) setting.
Each press of either button will move the hands (
z
Hour Hand
and
c
Minute
Hand
) one minute.
Holding down
D
or
B
will start high-speed
z
Hour Hand
and
c
Minute
Hand
movement in the applicable direction. To stop high-speed hand
movement, press any button.
When setting the time, make sure that the
x
Second Hand
is correctly
indicating
A
(a.m.) or
P
(p.m.) for the time you are setting.
If you want to change the date setting at this time, press
C
and perform the
procedure starting from step 3 under “To change the current date setting
manually”.
After the time setting is the way you want, press
5.
A
to return to regular
timekeeping.
This will cause the
x
Second Hand
to move automatically to 12 o’clock and
resume movement from there.
@
B
+
@
>
>
@
B
+
@
>
To change the current date setting manually
@
00
50
10
40
20
30
90
60
80
70
Setting the year (tens digit)
In the Timekeeping Mode, keep
1.
A
depressed (for about fi ve seconds)
as the
x
Second Hand
goes through the following sequence.
Moves to
YES
(or
Y
for some models) or
NO
(
N
) to indicate the last
signal reception result, then to
READY
(
R
), and then to the city code
of the currently selected Home City.
Press
2.
C
twice.
The
x
Second Hand
will move to the tens digit of the current year
setting. This is the year setting mode.
The year can be set in the range of 2000 to 2099.
Press
3.
D
to move the
x
Second Hand
clockwise until it is pointing at
the year tens digit you want to select.
@
0
5
1
4
2
3
9
6
8
7
Setting the year (ones digit)
After you select the year tens digit, press
4.
C
.
The
x
Second Hand
will move to the ones digit of the current year.
Press
5.
D
to move the
x
Second Hand
clockwise until it is pointing at
the year ones digit you want to select.
After you select the year ones digit, press
6.
C
.
The
x
Second Hand
will move to the currently selected month. This
is the month setting mode.
@
Dec
May
Jan
Apr
Feb
Mar
Sep
Jun
Aug
Jul
Setting the month
Oct
Nov
Use
7.
D
to move the
x
Second Hand
to the month setting you want.
8. After the month setting is the way you want, press
C
.
The
x
Second Hand
will move to 12 o’clock, and the watch will enter
the day setting mode.
Use
9.
D
(+) and
B
(–) to change the
n
Day
setting.
If you want to change the time setting at this time, press
C
and then perform
the procedure starting from step 3 under “To change the current time setting
manually”.
After the settings are the way you want, press
10.
A
to return to regular
timekeeping.
This will cause the
x
Second Hand
to move automatically to 12 o’clock and
resume movement from there.
The day of the week indicated by the
v
Left Dial Hand
changes automatically
in accordance with the date (year, month, and day).
Note
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s rechargeable battery replaced or
after power drops to Level 3.
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Hand Functions
x
x
Second Hand:
Indicates the stopwatch 1/10-second count.
v
v
Left Dial Hand:
Indicates the stopwatch 1/100-second count.
b
b
Right Dial Hands:
Indicate the stopwatch minutes and seconds.
To perform elapsed time measurement
Use
1.
C
to move the
v
Left Dial Hand
to
0
.
This indicates the Stopwatch Mode.
Now you can perform either of following stopwatch operations.
2.
You will not be able to perform any stopwatch operation while the hands are
moving to their initial positions after you enter the Stopwatch Mode.
To perform an elapsed time operation
B
B
B
B
D
Start
Stop
(Restart)
(Stop)
Reset
To pause at a split time
B
D
Normal stopwatch hand movement will
resume automatically after fi ve seconds.
B
D
Start
Split
Stop
Reset
6
>
@
@
>
*