Casio 3518 User Manual Download

Page: 20 / 78

EN-18

Fishing/Moon Mode

The Fishing/Moon Mode displays an indicator that

shows, as one of five levels, the suitability of a specific

date and time (minute 00 to minute 59 of a particular

hour) for fishing. This mode also can be used to display

Moon Data (Moon age and Moon phase) for a specific

date.

•

If you doubt that the fishing level indicator or current

Moon data is wrong for some reason, check the

current Timekeeping Mode settings (time, date, and

Home Site), and correct them if required.

•

See “Moon Phase Indicator” for information about the

Moon phase indicator.

•

All of the operations in this section are performed in

the Fishing/Moon Mode, which you enter by pressing

Fishing level indicator

Time

Moon phase indicator

Fishing Level Screen

Year Month – Day

Summary of Contents for 3518















































































Search results

Summary of Contents for 3518

Reviews:

Related manuals for 3518

Brands by name

Popular brands

Casio 3518, User Manual

Search results

Summary of Contents for 3518

Reviews:

Related manuals for 3518

Brands by name

Popular brands