Casio 3475 Operation Manual Download Page 58 | Manualshive

Page: 58 / 58

Casio 3475 Operation Manual Download Page 58

Pedometer

Q1

Displayed step count is not correct.

While the watch is on your wrist, the
pedometer may detect non-step movements
and count them as steps.

l

Also, step count problems can also be caused
by how the watch is being worn and abnormal
arm movement while walking.

l

Causes of Incorrect Step Count

Q2

The step count does not increase.

To avoid miscounting of non-walking
movements, the step count is not displayed at
the beginning of a walk.
It appears only after you have continued
walking for about 10 seconds, with the number
of steps you took during the first 10 seconds
included in to the total.

Q3

[ERROR] appears when using the
pedometer.

[ERROR] (error) is displayed when sensor
operation is disabled because of sensor or
internal circuitry malfunction.
If the indicator remains on the display for more
than three minutes or if it frequently appears,
it could indicate a faulty sensor.
Contact a CASIO service center or your
original retailer.

Alarms

Q1

There is no sound and/or vibration
operation performed for alarms.

Is the watch’s battery charged?

Charge the watch until the battery is
sufficiently recharged.

l

Charging the Watch

Is alarm sound and/or vibration enabled?

Enable the alarm.

l

Turning Off an Alarm

Operation Guide 3475

58

«
...
56
57
58

Summary of Contents for 3475



























































Reviews:

No comments