Operation Guide 3422
E-29
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x
All of the operations in this section are performed in
the World Time Mode, which you enter by pressing
C
(page E-5).
To view the time for another city code
In the World Time Mode, press
D
to scroll eastwardly
through city codes.
In the World Time Mode, press
B
to scroll westwardly
through city codes.
x
For full information about city codes, see the “City Code
Table” at the back of this manual.
x
If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make necessary changes.
Current time and date in
the zone of the selected
city code
City code
E-28
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use
D
to select the Hourly Time
Signal (
).
2. Press
A
to toggle it on and off.
x
The Hourly Time Signal on indicator (
) is shown on
the display in all modes while this function is turned on.
Hourly time signal on
indicator
E-27
To turn an alarm on and off
1. In the Alarm Mode, use
D
to select an alarm.
2. Press
A
to toggle it on and off.
x
Turning on an alarm (
,
,
,
, or
)
displays the alarm on indicator (
or
).
x
In all modes, the alarm on indicator is shown for alarm
that is currently turned on.
x
The alarm on indicator fl ashes while the alarm is
sounding.
x
The snooze alarm indicator (
) fl ashes while the
snooze alarm is sounding and during the 5-minute
intervals between alarms.
Snooze alarm indicator
E-26
x
Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-7)
Displaying the
setting screen (page E-23)
To test the alarm
In the Alarm Mode, hold down
D
to sound the alarm.
E-25
4. While a setting is fl ashing, use
D
and
B
to change it as described below.
Screen
To do this:
Do this:
Change the hour and
minutes
Use
D
(+) and
B
(–).
x
With the 12-hour format, set the time correctly
as a.m. or p.m. (
P
indicator).
x
To set an alarm that does not include a month
and/or day, set for each setting.
Change the month and day
5. Press
A
to exit the setting screen.
Alarm Operation
The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every fi ve minutes, until you turn the alarm off (page E-27).
x
Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode time.
x
To stop the alarm tone after it starts to sound, press any button.
E-24
2. After you select an alarm, hold down
A
until the hour setting of the alarm time
starts to fl ash, which indicates the setting screen.
x
This operation turns on the alarm automatically.
3. Press
C
to move the fl ashing in the sequence shown below to select other
settings.
Hour
Minutes
Month
Day
C
C
C
C
E-23
To set an alarm time
1. In the Alarm Mode, use
D
or
B
to scroll through the
alarm screens until the one whose time you want to set
is displayed.
x
To set a one-time alarm, display an alarm screen
,
,
, or
. To
set the snooze alarm, display the
screen.
x
The snooze alarm repeats every fi ve minutes.
E-22
Alarm Types
The alarm type is determined by the settings you make, as described below.
x
Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
x
Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specifi c time, on the specifi c date you set.
x
1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
x
Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at the time you set, on the day you set.
E-21
Alarms
You can set up to fi ve independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms is a snooze alarm, while the
other four are one-time alarms.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
x
There are fi ve alarm screens numbered
,
,
,
and
for the one-time alarm, a snooze alarm screen
indicated by
. The Hourly Time Signal screen is
indicated by
.
x
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing
C
(page E-5).
Alarm date
(Month – Day)
Alarm time
(Hour : Minutes)
Alarm number
Alarm on indicator
E-20
To use the countdown timer
Press
D
while in the Countdown Timer Mode to start the
countdown timer.
x
The countdown timer operation continues even if you exit
the Countdown Timer Mode.
x
Press
D
while a countdown operation is in progress to
pause it. Press
D
again to resume the countdown.
x
To stop a countdown operation completely, fi rst pause
it (by pressing
D
), and then press
B
. This returns the
countdown time to its starting value.