Operation Guide 3144
5
Note
•
While the periodic record, high altitude, or low altitude screen is displayed,
the bottom part of the display alternates between the measurement date
(month and day) and measurement time, at 1-second intervals.
Altitude
Measurement date
(Month – Day)
Alternates at
1-second intervals.
Measurement time
(Hour : Minute)
Periodic
record
indicator
▲
▲
Periodic Records
Periodic records show only data for the last save session performed with the
watch. There can be up to 40 periodic records in memory.
Current Session Record Contents
The following data items show the contents of the current session record.
Data Type
High Altitude
Low Altitude
Total Ascent
Total Descent
Description
Highest altitude reached during the
recalled session.
Lowest altitude reached during the recalled
session.
Total cumulative ascent during the recalled
session.
Total cumulative descent during the
recalled session.
Screen Name
MAX
MIN
ASC
DSC
REC
(40)
REC
(2)
REC
(1)
MAX
MIN
ASC
DSC
To view periodic records and current session record contents
1. Enter the Data Recall Mode.
2. Use
D
and
B
to scroll through the data and display the one you want.
Periodic
records
D
B
Current session
record
•
To view the current session record contents, use
D
to scroll forward
past the last periodic record (which will display the current session
record
MAX
screen), or
B
to scroll back past the first periodic record
(to the
DSC
screen).
3. After you are finished viewing data, press
C
to exit the Data Recall Mode.
•
Dashes (
xxxx
) will be displayed if there is no corresponding data due to
error, etc. In such cases, total ascent (
ASC
) and total descent (
DSC
)
values will show zero.
•
When the total ascent (
ASC
) or total descent (
DSC
) exceeds 99,995
meters (or 99,980 feet), the applicable value will restart from zero.
World Time
World Time displays the current time in 30 cities
(29 time zones) around the world.
•
If the current time shown for a city is wrong,
check your Home City time settings and make
the necessary changes.
•
For full information on city codes, see the “City
Code Table”.
•
All of the operations in this section are
performed in the World Time Mode, which you
enter by pressing
C
.
To view the time in another city
In the World Time Mode, use
D
(east) and
B
(west) to scroll through city codes (time zones).
•
When the currently selected time zone is one
that includes mostly ocean, a value indicating
the zone’s Greenwich Mean Time differential
appears in place of a city code.
Timekeeping
Mode time
Current time in the zone
of the selected city code
City code
To toggle a city code time between Standard Time and Daylight
Saving Time
1. In the World Time Mode, use
D
(east) and
B
(west) to display the city code (time zone)
whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down
A
to toggle between Daylight
Saving Time (
DST
indicator displayed) and
Standard Time (
DST
indicator not displayed).
•
The
DST
indicator appears on the display
whenever you display a city code for which
Daylight Saving Time is turned on.
•
You cannot toggle between Daylight Saving Time and Standard Time if the
displayed city code is
GMT
.
•
Note that the DST/Standard Time setting affects only the currently
displayed city code. Other city codes are not affected.
DST indicator
Stopwatch
The stopwatch lets you measure elapsed time,
split times, and two finishes.
•
The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
•
The stopwatch continues to run, restarting from
zero after it reaches its limit, until you stop it.
•
The stopwatch measurement operation
continues even if you exit the Stopwatch Mode.
•
Exiting the Stopwatch Mode while a split time is
frozen on the display clears the split time and
returns to elapsed time measurement.
•
All of the operations in this section are
performed in the Stopwatch Mode, which you
enter by pressing
C
.
Minutes
Current time
1/100 second
Hours
Seconds
J
J
J
J
J
J
J
J
J
J
J
First runner
finishes.
Display time
of first runner.
J
Elapsed Time
D
D
D
D
B
Start
Stop
Re-start
Stop
Clear
Split Time
D
B
B
D
B
Start
Split
Split release
Stop
Clear
Two Finishes
D
B
D
B
B
Start
Split
Stop
Split release
Clear
To measure times with the stopwatch
Display time of
second runner.
Second runner
finishes.
(
SPL
displayed)
Countdown Timer
You can set the countdown timer within a range
of one minute to 24 hours. An alarm sounds
when the countdown reaches zero.
•
All of the operations in this section are
performed in the Countdown Timer Mode,
which you enter by pressing
C
.
To set the countdown start time
1. While the countdown start time is on the
display in the Countdown Timer Mode, hold
down
A
until the hour setting of the
countdown start time starts to flash, which
indicates the setting screen.
•
If the countdown start time is not displayed,
use the procedure under “To use the
countdown timer” to display it.
Minutes
Current time
Hours
Seconds
2. Press
C
to move the flashing between the hour and minute settings.
3. Use
D
(+) and
B
(–) to change the flashing item.
•
To set the starting value of the countdown time to 24 hours, set
OO
’
OO
.
4. Press
A
to exit the setting screen.
To use the countdown timer
Press
D
while in the Countdown Timer Mode to start the countdown timer.
•
When the end of the countdown is reached, the alarm sounds for five
seconds or until you stop it by pressing any button. The countdown time is
reset to its starting value automatically when the alarm sounds.
•
Press
D
while a countdown operation is in progress to pause it. Press
D
again to resume the countdown.
•
To stop a countdown operation completely, first pause it (by pressing
D
)
and then press
B
. This returns the countdown time to its starting value.
Alarms
You can set five independent daily alarms. When
an alarm is turned on, the alarm tone sounds
when the alarm time is reached.
You also can turn on an Hourly Time Signal,
which will cause the watch to beep twice every
hour on the hour.
•
The alarm number (
ALM-1
through
ALM-5
)
indicates an alarm screen.
SIG
is shown when
the Hourly Time Signal screen is on the display.
•
When you enter the Alarm Mode, the data you
were viewing when you last exited the mode
appears first.
•
All of the operations in this section are
performed in the Alarm Mode, which you enter
by pressing
C
.
Alarm time
(Hour : Minutes)
Alarm number
Current time
