Operation Guide 3040
8
c. When the hour, minute, year, month, or day setting is
selected
Press the
D
button to increase the
selected setting or the
B
button to
decrease it.
•
Holding either button scrolls the
setting at high speed.
d. When the Power Saving setting is selected
Press the
D
button to toggle Power
Saving ON and OFF.
•
Turning on Power Saving causes
the Power Saving indicator to
appear on the setting screen.
Repeat the above steps as many times as necessary to
select each setting and change it as required.
•
When setting the hour, make sure you specify AM (no indicator) or
PM (P) correctly when using 12-hour timekeeping, or that you
specify the correct 24-hour time.
•
You can set a year in the range of 00 (2000) to 99 (2099). The
day of the week is set automatically in accordance with the date
you set.
•
The watch makes adjustments for leap years and month lengths
automatically.
7.
Use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–) buttons to change the currently
selected setting.
•
Use
D
(+) and
B
(–) to change the currently selected
setting.
a. When the 12/24-hour timekeeping setting is selected
Press the
D
button to toggle the
timekeeping format between 12-hour
(“12H” indicator) and 24-hour (“24H”
indicator).
b. When the seconds setting is selected
Press the
D
button to reset the
seconds to 00 in accordance with
the time signal on the radio, TV, etc.
•
Pressing the
D
button while the
seconds count is in the range of
30 to 59 resets it to 00 and also
adds 1 to the minutes. Pressing
the
D
button in the range of 00
to 29 resets the seconds count
without changing the minutes.
4.
Press the
C
C
C
C
C
button to
display the summer time
setting.
5.
Press the
D
D
D
D
D
button to
cycle through the summer
time (DST) settings
described below.
You can use the following procedure to set the current time and
date of the Home City that you have selected in the Timekeeping
Mode.
•
Always use the Timekeeping Mode to set and adjust the current
time and date settings.
•
You can use the dual time screen to view the current time in two
different time zones.
•
You can also turn Power Saving on and off while setting the time
and date.
❚
To configure Home City settings
1.
Make sure that the time
whose settings you want
to configure is selected as
your Home Time.
•
The Home Time is the time
that appears on the Home
Time screen. It is also the
lower time on the Dual Time
screen.
•
To switch the positions of the
Home Time and Secondary
City time on the Dual Time
screen, hold down the
D
button for about three
seconds.
2.
Press the
A
A
A
A
A
button so the
Home City code flashes
on the display. This is the
setting screen.
3.
Use the
D
D
D
D
D
(Eastward) and
B
B
B
B
B
(Westward) buttons to
scroll through the city
codes until the one you
want to use as your Home
City is displayed.
•
See “City Code List” for a
complete list of city codes.
•
Holding either button scrolls
the setting at high speed.
Home Time
Secondary City Time
City Code
TYO = Tokyo
(Eastward)
(Westward)
Setting the Home City Time and Date
6.
Use the
C
C
C
C
C
button to move
the flashing to the setting
you want to change.
•
Each press of
C
moves the
flashing between the settings
as shown below.
Summer Time
Home City
12/24-hour
Timekeeping
Hour
Minute
Month
Year
Day
Seconds
Power Saving
12/24-hour Timekeeping
Resets to 00.
(+)
(–)
Month
Year
Day
Minute
Hour
AT (AUTO)
This setting enables the auto summer time setting, which
turns summer time on or off in accordance with the received
time calibration signal.
OFF
This setting turns off summer time, and displays the current
time normally.
ON
This setting turns on summer time.
•
Selecting this setting displays the DST indicator, and
advances the current time setting by one hour.
•
Note that the above setting toggles between “OFF” and “ON”
when any city code other than those listed under “Reception
Ranges” is selected as the Home City.
8.
When all of the settings are the way you want, press the
A
A
A
A
A
button to exit the setting screen.
•
This exits the setting screen.
•
The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
