background image

Shuffle King II user manual

shuffleking2.casinoshuffler.com

 3  Specification and working conditions

Shuffler dimensions (length x width x depth even with the top panel): 

280 x 146 x 288

Top panel dimensions (on the table): 

293 x 170 mm

Dimensions of the table hole (tol2mm in both directions):

284 x 151 mm

Weight: 

9.5 kg

Shuffling time: 

35s max.

Feed: 

24VD, 2A max.

Working temperature: 

20 to 35°C

Relative humidity: 

10 to 90% (non-condensing)

Working position: 

vertically with the lid on top

The shuffler Shuffle King 2 shall only be used with the delivered Power adapter type: 
SUNNY: SYS1443-xy-T3.

 4  Shuffler description

The shuffler is designed for one pack of plastic or paper cards with the size of 88 x 63 mm max.; it  
is also possible to use narrow cards with dimensions of 88 x 57 mm. Shuffler divides cards into 52 
trays. Excessive cards in the deck will stay unshuffled in the insertion compartment. Height of an 
inserted deck may not exceed the edge designated in Fig. 8. 
Shuffling of cards will be accomplished in a single cycle. Cards are randomly distributed to 52 trays 
one by one, and they are subsequently lifted to the position for withdrawal. Each card is counted; 
the total number is shown on display. If there is a different number than 52, operator is notified 
about a wrong card number in the inserted deck by the notice on display.

Page 6 / 15

Summary of Contents for SHUFFLE KING II
















Reviews: