Shuffle King II user manual
shuffleking2.casinoshuffler.com
7 Cleaning of shuffler
Please see our detailed sample video of cleaning the shuffler at the link below:
https://www.youtube.com/watch?v=IPr3I_xbJoY
Before cleaning it is necessary to make sure that both cards compartments are empty and let the
compartments in opened position. You can start cleaning mode by pressing
Clean
button in
Configuration menu, accessible from
During start of cleaning mode, the compartment for cards removal will go down to a lower position
and all rollers start to rotate. For better access, remove the filter part (Fig. 18). Thoroughly clean all
silicone rollers with a piece of cloth or cotton swab soaked in pure petrol or isopropylalkohol (do
not use petrol cleaner, acetone and similar aggressive liquids). Do not forget to clean the silicone
rollers of the filtration part.
Cleaning of all rollers is recommended after each 500 shuffling cycles to achieve smooth operation.
Shuffler reminds the need of cleaning by a notice on display after each 500 cycles from the last
cleaning. This information has no impact on the shuffler function, the operator is just notified of the
necessity to perform cleaning. To remove this notice, a cleaning mode should be started.
Check cleanness of the optical cells as well – possible deposits of dust (Fig. 19, Fig. 20). Cleaning
of optical cells is recommended once a month.
Given the operation frequency and cleanness of the environment, the shuffler should be sometimes
cleaned from the deposited dust and other contaminants even inside after opening
At the end of cleaning, do not forget to put back the filtration part. The pins must fit into the holes
in the side boards – an audible click!
Fig. 18:
Page 13 / 15
