Shuffle King II user manual
shuffleking2.casinoshuffler.com
6 Shuffler settings
By pressing the small button on the main screen, you can access shuffler settings. Read below all
explanatory notes for the options in settings.
6.1 Configuration (
1
)
Clean
– you can start and stop
Autostart
Cards type
– choose correct width (57 or 63 mm) and
material (plastic / paper) of cards you are using.
Mech.test
– this function is used only by developers
DeckCount –
allows to choose between shuffle of 52 or
53 cards in a deck
Incorrectly selected card width can cause
miscounting!
6.2 LCD settings (
2
)
Brightness
– you can set the display brightness at several
intensities.
Sound
– you can turn on / off sound of display.
Calibration
– pressing the button will start the display
calibration for touch control (
Test LCD
– this function is used only by developers
Sensitivity
– allows you to adjust the sensitivity of the
display to touch.
In the case of collecting cards by the
croupier over the display, choose a lower sensitivity to
prevent accidental button press on the display.
Page 10 / 15