background image

Shuffle King II user manual

shuffleking2.casinoshuffler.com

Fig. 12:

When shuffling is completed in the correct count of 52, the 
total number of cards in shuffled deck is displayed (Fig. 12) 
and  you  can open the  shuffler  by pressing the big  green 
button. Shuffled cards ready to remove will appear in the 
removal compartment (

Fig. 10

).

In rare case if the position of removal 
compartment is lower than usual, you can 
additionally lift it before removing the cards, by 
repeated pressing the big button.

In case that incorrect number of cards was counted, the error message will appear on the display 
after shuffling, informing about too many cards (Fig. 13) or too few cards:

Fig. 13:

By touching the screen you will return to the main screen 
(Fig. 12) where you can see the current count and open the 
shuffler by pressing the big button.

If there are too many cards, please first remove unshuffled 
excessive   cards   out   from   the   insertion   compartment   (to 
avoid autostart), then the remaining cards from the removal 
compartment. Check the cards and possibly correctness of 

cards width setting

.

 5.3  Autostart function

Use two decks of cards. When opening the shuffler after first deck shuffling, you can see the deck 
on the removal compartment. Insert the new deck into the insertion compartment and then remove 
the shuffled deck. The shuffler will automatically start to shuffle the new deck, without pressing the 
big button. Autostart function can be disabled in 

shuffler settings

.

 5.4  Turning off the shuffler

Fig. 14:

Empty both compartments for cards insertion and removal. 
The big button will turn blue (Fig. 14). By pressing it close 
the shuffler. Now you can safely turn off the shuffler using 
the master switch (

Fig. 9

).

Page 9 / 15

Summary of Contents for SHUFFLE KING II
















Reviews: