Cashino CSN-A2L, User Manual

Page: 28 / 48

Xiamen Cashino Technology Co.,Ltd A2L User Manual
28
k = (xL+xH*256)*(yL+yH*256)*8
Totaled the defined data Area = 64 k bytes
Default None
Support Model All
Notes
Frequent writing command executions may damage the NV
memory.
Therefore, it is recommended to write the NV memory no more than
10 times per day.
The printer performs a hardware reset operation after the
procedure of placing the image into the NV memory. Therefore,
user-defined characters, downloaded bitmaps should be defined only
after completing this command. The printer clears the receiving and
printing buffers and resets the printer to the mode that workable when
power on. (hardware reset interface is not supported )
This command cancels all NV bitmaps that have already been
defined by this command.
From the beginning of the processing of this command till the
accomplishment of hardware reset, mechanical operations (including
initializing the position of the print head when the cover is open,
paper feeding using the FEED button, etc.) cannot be performed.
During this command processing, the printer is busy and stops
receiving data when writing data to the user's NV memory. Therefore,
data transmission, including real-time commands, is prohibited
during the execution of this command.
NV bitmap is a bitmap defined in non-volatile memory, Define FS
p printing with FS q.
In standard mode, this command is valid only when processed at
the beginning of the line.
This command is valid when 7 bytes <FS yH> of the command
are processed normally.
When the data volume exceeds the left capacity of the range
defined by xL, xH, yL, and yH, the printer will process the range
defined by xL, xH, yL, and yH outside the defined range.
In the first group of NV bitmaps, when any one of xL, xH, yL, yH
is out of the definition range, this command is disabled.
In groups of NV bitmaps other than the first group, when xL, xH,
yL, yH out of the defined range, it stops processing this command
and starts writing into the NV images. At this time, NV bitmaps that
haven’t been defined are disabled (undefined), but any NV bitmaps
before that are enabled.
The d indicates the definition data. In data (d) a 1 bit specifies a
dot to be printed and a 0 bit specifies a dot not to be printed.
This command defines n as the number of a NV bitmap.
Numbers rise in order from NV bitmap 01H. Therefore, the first data