CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.tm
EN
Settings
Please note that changes in the setup menu can lead to malfunctions and increased non-recognition of banknotes. Therefore
please only make changes if a technician from CashConcepts invited and instructed you to do so.
Setup Menu
To make adjustments to the sensors, press and hold the CF button
while turning on the machine. The left shown message appears on the
display.
You can switch back and forth via the Value button between the
different sensors.
Using the ADD key reduces the sensitivity of the sensors and the M-A
button increase.
The factory settings are: Width (4), UV (4), MG/MT (2), Color (4), IR
(3), Paper (3).
Hold for 3 seconds the Restart button pressed to save the changes
and exit the menu.
- 4 -
Width
Sensitive Level
Cleaning and Maintenance
Cleaning the sensors
Through the banknotes and settling dust deposits will occur on the sensors of the machine. These leads to increased non-
detections of genuine banknotes.
Therefore clean periodically the sensors of CCE 230 NEO. Turn off the machine when cleaning the unit in
general and unplug the power supply.
With special cleaning towels for banknote counters you can easily and reliably clean the sensors. These cloths are placed as a
banknote into the machine and then transported manually by turning the Feeder rollers in the hopper area through the machine.
The deposit on the sensors is removed from the towel. Use the towels from both sides several times during a cleaning process.
With a compressed air spray (without LPG) you can clean the transport way of the banknotes from contamination from both
the Hopper and from the Feeder side.
To clean the housing we recommend a soft cotton cloth. Do not use liquids to clean the machine!
