CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.tm
EN
Setting the functions
You can adjust the CCE 230 NEO to your business needs as follows:
ADD Function
By pressing the ADD button you can switch ON and OFF the ADD
function. If the addition function is activated, this is indicated in the
lower left corner of the display by ADD. All counts of one
denomination were added in the number banknotes and total value. If
the value of the notes is changed or the Clear button is pressed, the
result will be deleted.
ADD
Batch Counting
If you want to count a certain number of notes, you can use the
preinstalled Batch stops (100 - 50 - 20 - 10 - 0) by repeatedly pressing
the key BAT. Alternatively, you can enter a freely selectable counting
stop using the numeric panel. Please note that the maximum number
of notes in the Stacker is 200 notes. The batch value is displayed in
the lower display area.
B: ---
Batch Counting OFF
B: 100
Batch Value 100 banknotes
Counting Speed
By pressing the Speed button you can select the counting rate (L =
800, M = 1.200, H = 1500 notes / minute). Please note that heavily
used banknotes can be handled better at a lower speed. The selected
counting speed is displayed in the lower right corner of the display.
S: M
Auto / Manual Start
By pressing the M-A button, you can select whether the count should
start when inserting the banknotes automatically (AUTO) or whether
the count should start by pressing the restart button (MAN). The
selected variant is displayed in the upper right corner of the display.
AUTO
