CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 5 of 5
STEP 6:
Locate the chamfered edge on the new chip, sit the new chip in the socket and press
down. NOTE: The chip should go down into the socket with little effort. DO NOT
FORCE IT. DO NOT ALIGN THE CHIP ACCORDING TO THE POSITION OF THE
LABEL. MATCH THE CHAMFERED EDGE.
Chamfered
Edge
STEP 7:
DIP switch settings do not change. Re-install the CPU circuit board. Use the tweezers
and place the cables into the connectors. Push the connector heads down to lock the
cables into the connectors. Re-insert the plastic push rivet in the side along with the
spacer. Place the cover plate back and re-insert the two (2) push rivets or screws.
Apply the update sticker to the outside of your validator for reference.
STEP 8:
Power up the validator and begin accepting the new $ 5 and $ 10 bills.
US2xxx30
US4xxx30
US5xxx30
