CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 4 of 5
STEP 2:
Please note which cable goes to which connector. Use the small flat head driver and
lift the cable connector heads up to release the cables. Use the tweezers and gently
pull the cables up and out from the connectors on the CPU printed circuit board.
CHAMFERED EDGE
STEP 3:
Attach the ground strap to your wrist and the other end with the clip to a metal water
pipe or electric ground.
STEP 4:
Remove the plastic rivet from the side of the validator and remove the circuit board.
Locate the CPU chip to be replaced.
STEP 5:
Locate the corner slots in the socket and insert the hooks of the extraction tool. While
gently squeezing the tool, the chip can be lifted out of the socket. Pay attention to the
fact that one corner of the chip has a chamfered edge. The socket also has a corner to
fit this edge.
INSERT
EXTRACTOR
TOOL HOOK
INSERT
HERE
EXTRACTOR
TOOL HOOK
HERE
CHAMFERED
HOOKS
EDGE
