Casella CEL
Page 7 of 27
2. CHARGING THE TUFF PUMPS / BATTERIES
There are two methods of charging the battery.
1.
When the battery is attached to the pump.
2.
The battery on its own.
This section details both methods.
Figure 2 Fit Battery to Pump and then to the Charger
•
Insert pump into charging cradle as shown above.
•
Fast charge starts and the red LED on the pump flashes.
•
When fully charged the blue LED will illuminate. The pump can be left in the cradle
on trickle charge or may be removed.
•
Individual battery packs can also be charged / stored in the cradle. The battery
pack’s own red LED will indicate that charging is in progress.
Battery Charge Mode
Note:
Make sure all pumps are fully charged before use.
