manualshive.com logo in svg

Case WX210, Service Manual, Page: 20 / 41

Share
Download
Case WX210 Service Manual Download Page 20

 

0 - 16   

SAFETY INSTRUCTIONS 

WX210 - WX240

 

 

 

 

Rules for driving on the road 

Recovering and towing the machine 

 

 

The machine must not be driven on 
the public highway unless the con-
ditions of the “General Operating 
Permit” are observed or, in the 
event of deviations from the “Gen-
eral Operating Permit”, a 

vehicle-

specific operating permit

 has 

been granted. These permits must 
be present in the cab during such 
travel. 

- 

Always have a warning triangle, 
warning lamp and first-aid kit on 
board. 

- 

Bring the working equipment into a 
position in which the maximum 
machine dimensions are not ex-
ceeded. 

- 

Switch the bucket/grab switchover 
valve to "Grab" position. The 
bucket cylinder is then hydrauli-
cally blocked. 

- 

Mount clearance lamp on stick and 
connect to a socket. 

- 

Raise levelling blade completely 
and attach a reflector. 

- 

Raise claws (option) completely 
and block mechanically. 

- 

Switch off floodlamps. 

- 

Lock superstructure.. 

Tow the machine with a tow-rod or 
towing rope only. 

The tow-rod or rope must be free 
from damage. They must be dimen-
sioned in such a way that the calcu-
lated breaking load is equal to three 
times the tractive power of the tow-
ing machine. 

The towing vehicle must have ade-
quate tractive power. 

Drive slowly, carefully and 
smoothly. 

All persons must keep clear of the 
tow-rod or rope. 

 

- 

Tow only if the brakes and the 
steering of the machine are func-
tioning properly and if the machine 
cannot be otherwise transported. 

- 

Tow defective machines only as far 
as necessary to recover the ma-
chine from hazardous areas. 

- 

After the recovery, the machine 
must be secured against inadver-
tent movements and unauthorized 
starting. 

- 

Have the machine repaired before 
transporting it over greater dis-
tances, or load it onto a transport 
vehicle. 

- 

The machine is not suitable for 
towing trailers or other vehicles 
over longer distances; this would 
result in damage to axles and 
gearboxes. The tow coupling is 
designed solely for towing or re-
covering vehicles from  hazardous 
areas or for lashing purposes on 
transport vehicles. 

 

Î

 

Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)

 

Summary of Contents for WX210










































Reviews:

No comments