manualshive.com logo in svg

Case WX210, Service Manual, Page: 17 / 41

Share
Download
Case WX210 Service Manual Download Page 17

 

WX210 - WX240 

SAFETY INSTRUCTIONS 

0 - 13

 

 

 

Safety instructions for machine operation 

40000022-en

Before setting off 

 

Remove any soil, mud, snow, ice, 
grease and oil from your working 
footwear before operating the ma-
chine. You might otherwise slip 
from steps and pedals and thus 
initiate inadvertent movements. 

Adjust the driver’s seat and the mir-
ror before setting off. 

Close the front window and the cab 
door. 

If the machine is equipped with a 
restraining belt for the operator, 
fasten the belt. 

Before setting off, sound the horn to 
warn any persons in the immediate 
vicinity. 

Never allow other persons to travel 
with you on the machine. 

 

Note the position of the working equip-
ment 

 

Never drive with the working 
equipment extended, as that may 
impair the stability of the machine. 
Bring the working equipment as 
close as possible to the machine. 

 

Taking care during operation 

 

If the front equipment or another 
part of the machine collides with a 
higher obstacle, e.g. a bridge, both 
the machine and the other object 
are damaged, and persons may be 
injured. 

Take care to prevent the boom or 
stick from colliding with higher 
obstacles. 

 

 

Fig. 7 

Î

 

Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)

 

Summary of Contents for WX210










































Reviews:

No comments