background image

INTRODUCTION

AVOID ACCIDENTS

The majority of accidents and injuries which occur in plants, in farms and at
home or on roads, are caused by the non-observance of some simple and
fundamental rules of precaution and safety. For this reason in the MAJORITY
OF CASES THEY CAN BE AVOIDED: it is sufficient to foresee possible
causes and to act according with the necessary precaution and care.
With any type of machine, as much as good planned or built, it is impossible
to absolutely avoid risks of accidents without involving negatively some
essential features for a reasonable access and an efficient operation.
Read carefully the indication and cautions of this manual contained in the
SECTION “SAFETY PRECAUTIONS”.
A careful and cautious operator is the best warranty against accidents.
The careful observation of a single and elementary safety precautions would
be enough to avoid many serious accidents. This precaution is:

Never attempt any cleaning, lubrication or maintenance operation when
machine is moving.

YYY

S

  WARNING

YYY

Before carrying out any maintenance operation, adjustment and or repair
on machines equipped with attachments, controlled hydraulically or
mechanically, make sure that the attachment is lowered and safely set on
the ground. If in oder to get access to a machine part it is necessary to
hold the attachment lifted, this should duly be supported by means that
are not use to control the machine.

COPYRIGHT 

CNH FRANCE

Rue des Meuniers, 60330 LE PLESSIS BELLEVILLE FRANCE

All rights reserved. Reproduction of text or illustrations, in whole or in part, is strictly
prohibited

Find manuals at http://best-manuals.com/search?&s=CASE-9-91370

Summary of Contents for WX125




















































Reviews: