Case L780 Operator'S Manual Download

Page: 7 / 75

0-6

PRECAUTIONARY

STATEMENTS

PERSONAL SAFETY

Throughout this manual and on machine decals, you will find precautionary statements (“

DANGER

”,

“

WARNING

”, and “

CAUTION

”) followed by specific instructions. These precautions are intended for the personal

safety of you and those working with you. Please take the time to read them.

DANGER

This word “DANGER” indicates an immediate hazardous situation that, if not avoided, will result in death

or serious injury. The color associated with Danger is RED.

WARNING

This word “WARNING” indicates a potentially hazardous situation that, if not avoided, could result in

death or serious injury. The color associated with Warning is ORANGE.

CAUTION

This word “CAUTION” indicates a potentially hazardous situation that, if not avoided, may result in minor

or moderate injury. It may also be used to alert against unsafe practices. The color associated with

Caution is YELLOW.

FAILURE TO FOLLOW THE “DANGER”, “WARNING”, AND “CAUTION” INSTRUCTIONS MAY RESULT IN

SERIOUS BODILY INJURY OR DEATH.

MACHINE SAFETY

The precautionary statement (“

IMPORTANT

”) is followed by specific instructions. This statement is intended for

machine safety.

IMPORTANT:

The word “IMPORTANT” is used to inform the reader of something he needs to know to prevent

minor machine damage if a certain procedure is not followed.

INFORMATION

NOTE:

Instructions used to identify and present supplementary information.

ASAE S441.3 FEB04

ISO 11684

Summary of Contents for L780












































































Search results

Summary of Contents for L780

Reviews:

Related manuals for L780

Brands by name

Popular brands

Case L780, Operator'S Manual

Search results

Summary of Contents for L780

Reviews:

Related manuals for L780

Brands by name

Popular brands