Case CX210C, Service Manual

Page: 76 / 81

Engine - Engine and crankcase
6. Use a wrench [ 7 mm ] to loosen the hose band (1) on
the radiator, and then disconnect the upper hose (2) .
SMIL13CEX1230AB
3
7. Use a wrench [ 7 mm ] to loosen the hose band (1) on
the radiator, and then disconnect the lower hose (2) .
• Use caps to cover the radiator and hoses to prevent
the entry of water, dust or dirt.
• Before removing the radiator hoses, completely
drain the coolant.
SMIL13CEX1231AB
4
8. Use a wrench [ 13 mm ] to loosen the 2 line bolts (1) ,
and then disconnect the 2 lines (2) and (3) from the
compressor.
• Always remove the low-pressure (suction side) line
(2) first.
• Install caps or plugs to the compressor and lines to
prevent any entry of water, dust or dirt.
3. Line (discharge side)
SMIL13CEX1232AB
5
9. Use a wrench [ 8 mm ] to loosen the hose band (1) on
the intercooler, and then disconnect the hose (2) .
• Use caps to cover the line and hose to prevent the
entry of water, dust or dirt.
SMIL13CEX1233AB
6
48063128 27/10/2016
10.1 [10.001] / 13