Case CX210C, Service Manual

Page: 58 / 81

INTRODUCTION
Product identification
The CX210C LC is a totally hydraulic excavator. It consists of an undercarriage fitted with tracks and a turntable
bearing which supports the upperstructure frame. The upperstructure frame supports the attachment, at the front end
of the machine, plus the engine, hydraulics and cab. When the operator works the controls, the engine-driven pump
delivers hydraulic fluid to the control valves. The control valves distribute the hydraulic fluid to the various cylinders
and hydraulic motors employed. A cooling system maintains the hydraulic fluid at normal operating temperature.
SMIL16CEX1388EA
1
When ordering parts, obtaining information or assistance, always supply your CASE CONSTRUCTION Dealer with
the type and serial number of your machine or accessories. Write the following in the spaces below: the type, serial
number and year of manufacture of your machine, accessories and the serial numbers of the various hydraulic and
mechanical components.
Machine
(1) Designation/Model
Hydraulic Excavator CX210C LC
(2) Product Identification Number (PIN)
(3) Year of Construction
(4) Model Year
(5) Maximum operating mass
(the weight shown on the manufacturer's plate is the value
using the heaviest configuration and that it does not al-
ways correspond to the transport configuration)
(6) Engine power ISO 14396
SMIL15CEX3307AA
2
Engine
Manufacturer and model: ISUZU GI - 4HK1X
Serial number:
SMIL14CEX1604AA
3
48063128 27/10/2016
51