Engine - Engine and crankcase
68. Adjust the serpentine belt for the alternator by turning
the adjusting bolt
(3)
.
NOTE:
The alternator belt does not have a tensioning pro-
cedure. The alternator is adjusted all the way to the stop.
69. Torque the adjusting bracket bolt
(2)
to
50 N·m
(
37 lb
ft
).
70. Torque the jam nut for the adjusting bolt
(3)
to
30 N·m
(
22 lb ft
).
71. Torque the mounting bolts
(1)
to
50 N·m
(
37 lb ft
).
RCPH11SSL038AAP
35
72. If your machine is equipped with A/C, adjust the belt
for the A/C compressor by turning the adjusting screw
(1)
.
NOTE:
The belt is tightened correctly when a force of
1.0 kg
(
2.2 lb
) is applied to the center of the of the span of
the belt with a
3 mm
(
1/8 in
) of deflection.
73. Tighten the mounting bolts
(2)
.
RAPH12SSL0064BA
36
74. Place the radiator
(3)
inside the shroud, but do not
install the hardware.
75. Attach the hoses
(1)
to the radiator. Torque the hose
clamps
(2)
to
3 - 4 N·m
(
27 - 35 lb in
).
RAIL14SSL0797BA
37
47685161 24/06/2015
10.1 [10.001] / 28
