Case Alpha Series Service Manual Download Page 54

Page: 54 / 61

Engine - Engine and crankcase

51. If your machine is equipped with A/C, connect the lines

(1)

to the A/C condenser.

52. If your machine is equipped with A/C, connect the con-

denser fan.

RAPH12SSL0075AA

53. Loosen the alternator by loosening the mounting bolts

(3)

54. Loosely install the serpentine belt

(2)

for the alternator.

55. Turn the adjusting screw

(1)

clockwise to create a little

tension on the serpentine belt

(2)

NOTE:

Do not overtighten the adjusting screw. You will

not be able to install the cooling fan if the belt has been
tightened to specification on the pulleys.

RAIL14SSL0793BA

56. If your machine is equipped with A/C, loosen the A/C

compressor by loosening the mounting bolts

(3)

57. Loosely install the serpentine belt

(1)

for the A/C com-

pressor.

58. Turn the adjusting screw

(2)

clockwise to create a little

tension on the belt.

NOTE:

Do not overtighten the adjusting screw. You will

not be able to install the cooling fan if the belt has been
tightened to specification on the pulleys.

RAIL14SSL0794BA

47685161 24/06/2015

10.1 [10.001] / 25

Summary of Contents for Alpha Series






























































Search results

Summary of Contents for Alpha Series

Reviews:

Related manuals for Alpha Series

Brands by name

Popular brands

Case Alpha Series, Service Manual

Search results

Summary of Contents for Alpha Series

Reviews:

Related manuals for Alpha Series

Brands by name

Popular brands