Case 770 EX Service Manual Download | Manualshive

Page: 10 / 51

background image

INTRODUCTION

Safety rules - Ductile iron

DANGER

Improper operation or service of this machine can result in an accident.
Any unauthorized modifications made to this machine can have serious consequences. Consult an
authorized dealer on changes, additions, or modifications that may be required for this machine. Do
not make any unauthorized modifications.
Failure to comply will result in death or serious injury.

D0030A

Before you weld, cut, or drill holes on any part of this machine, make sure the part is not cast ductile iron. See your
dealer if you do not know if a part is cast ductile iron. The following are cast ductile iron parts:

• two wheel drive steering link

• dump links

• front axle

• bucket linkage

• Air conditioning (A/C) compressor mounting bracket

Unauthorized modifications to cast ductile iron parts can cause injury or death. Welding, cutting, or drilling can cause
cast ductile iron to break. Do not weld, cut, or drill to repair or to attach items to cast ductile iron parts on this machine.

48190544 26/09/2017

6

Find manuals at https://best-manuals.com

«
...
8
9
10
11
12
...
»

Summary of Contents for 770 EX




















































Reviews:

No comments

Related manuals for 770 EX

Brand: P.Lindberg Pages: 123

Brand: Barko Pages: 99

Brand: Volvo Pages: 44

Brand: Volvo Pages: 130

Brand: Volvo Pages: 130

Brand: Volvo Pages: 110

Brand: Volvo Pages: 113

Brand: Gravely Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands