Case 1021G, Service Manual

Page: 46 / 61

Engine - Engine and crankcase
23. Remove the two bolts (5) and the related washers and
nuts to separate the bracket (1) from the support (6) .
24. Remove the bolt (7) and the related washers and nut
to separate the P-clamp (8) from the DEF/A
D
B
LUE
®
bundle (9) .
LEIL15WHL0823AB
19
25. Loosen the bolt (3) . Remove the P-clamp (2) that se-
cure the sensor wiring harness (1) of the inlet temper-
ature sensor to the DOC mounting plate (4) .
LEIL15WHL1312AB
20
26. Loosen the bolt (1) and remove the P-clamp (2) from
the supply module support (3) .
27. Remove the P-clamp (2) from the temperature sensor
(DOC to SCR) wire (4) .
Cut the tie strap (6) .
28. Disconnect the sensor from the sensors wiring har-
ness (5) . Loosen the hexagonal nut of the tempera-
ture sensor (7) (DOC to SCR).
Remove the temperature sensor (7)
LEIL15WHL0824AB
21
29. Loosen the P-clamp (1) of the air intake aspirator en-
gine hose (2) .
Disconnect the air intake aspirator engine hose (2)
from the outlet of the Selective Catalytic Reduction
(SCR)
(3) .
LEIL15WHL0811AB
22
51428268_EN 19/12/2017
10.1 [10.001] / 11