Case IH MAXXUM 100, Service Manual

Page: 60 / 81

HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER
SYSTEM
BSE3604B
26
Hydraulic Lift Cylinders.
Models with mechanical draft control utilize a main lift cylinder which is located internally within the rear axle top cover
and also one or two
50 mm external cylinders depending on specification , Figure 27 .
BSE3844A
27
Models with electronic draft control utilize two external cylinders, one per lift arm, anchored to the rear axle with a
bracket, Figure
28 .
BSE3666A
28
Suspended front axle control valve.
Located on the right hand side of the tractor and attached to the rear axle centre housing. Receives high pressure
oil, via the trailer brake valve, if fitted, and with the use of processor controlled PWM valves controls oil to a cylinder,
attached between the front axle and front support, to provide a hydraulically controlled suspended front axle.
84276322A 31/05/2010
A.10.A / 25