SECTION 10 -- ENGINE -- CHAPTER 1
9
84419878A
-- 06 -- 2011
29. Disconnect the pipes (1 and 2) from the cab air
conditioning system compressor.
20
30. Set a fixed stand under the front of the front axle
support and one under the back of it.
31. Connect the engine to a chain (1) and to the
hoist.
21
32. Unscrew the bolts (1), on both sides, and remove
the engine.
33. Then rest the engine on an adequate support.
34. To re--fit the engine, proceed as follows:
ATTENTION
Use suitable tools to align the holes. NEVER USE
FINGERS OR HANDS.
22
-- Using a chain connect the engine to the hoist and
reattach it to the front axle support tightening the
screws to the prescribed torque.
-- Connect the pipes to the compressor of the cab
air conditioning system.
-- Using the appropriate bracket, secure the
maxi--fuse connecting cable.
-- Secure the steering cylinder control lines using
the relevant bracket.
-- Connect the steering cylinder control piping.
-- Position and secure the bracket retaining the
radiator to the engine.
-- Connect the electrical connection to the
filter/dryer.
-- Position and secure the maxi--fuse support
bracket.
-- Position and secure the sleeve connecting the
turbocharger to the air filter.
-- Position and secure the radiator upper sleeve.
