Case IH Farmall 45A, Service Manual

Page: 48 / 51

Engine - Engine and crankcase
760900752
2
10. Disconnect and remove the throttle cable from the
dash mounted throttle control lever, (10) .
11. Disconnect and remove the throttle cable from the foot
control pedal, (11) .
12. Drain fuel from fuel tank, (12) , into a suitable con-
tainer. Remove fuel tank from firewall.
13. Remove the firewall, (13) , from the tractor.
14. Disconnect all hydraulic tubes (14) , to the hydraulic
pump, (15) .
15. Attach a chain sling to the two hoist eyes, (1) .
16. Attach a suitable hoist to the chain sling.
NOTE: The hoist is used for supporting the engine and axle
assembly, not necessarily for lifting.
17. Roll a floor jack under the rear of the tractor, and place
under the clutch housing. Raise the jack enough to
support the drive train.
56071902A
3
51453914 30/05/2018
10.1 [10.001] / 9