Case IH FARMALL 110U, Service Manual

Page: 37 / 81

Engine - Engine and crankcase
42. Remove the hood support (2) , as described in Hood
pivoting system - Remove (90.100) .
43. Remove the Diesel Oxidation Catalyst (DOC) (1) as
described in Diesel Oxidation Catalyst (DOC) - Re-
move (10.500) .
MOIL15TR01225AA
23
44. Disconnect the wiring harness starting from the en-
gine control unit (1) up to the maxi fuse box taking care
to disconnect the temperature and pressure sensors
placed on the engine.
45. Collect the wiring on both sides of the engine and re-
move it.
MOIL15TR01228AA
24
46. Hook the rear part of the engine onto a hoist using
chains or hoisting ropes (apply two eyebolts, one to
the right and one to the left, on the upper part of the
flange containing the flywheel). Position a fixed jack
stand
(2) under the clutch housing (1) near the flange
coupling on the engine.
WLAPL4S10C129A
25
47. Position the movable tool for dismantling tractors
380003114 (2) with the support bracket and adapter
plate under the engine. Place a wooden block (1) in
the contact points between the tool and the engine.
WLAPL4S10C140A
26
48038069 02/10/2017
10.1 [10.001] / 10