Case IH FARMALL 100N, Service Manual

Page: 39 / 51

INTRODUCTION
A. Frame identification data plate
The tractor’s product identification number (PIN) is
stamped over the front support. It gives the safety
frame identification data.
B. Cab identification data plate
The cab identification plate is located at the rear on
the left−hand side as shown in the figure.
C. Frame and engine type identification summary data
plate
It links the identification number with the product iden-
tification number (PIN) and the machine's engine.
D. Front axle identification plate
The plate is located on the component and gives the
identification data for the axle fitted on the machine.
E. Engine identification data plate
The plate with the engine data installed on the tractor
is fitted on the right or left hand side of the engine
(depending on the model).
MOIL13TR00767CB
2
51430129 15/12/2017
30