Case IH FARMALL 100N, Service Manual

Page: 29 / 51

INTRODUCTION
Torque values for metric O-Ring Boss (ORB) port connections
S-Series * L-Series **
Metric
thread
Ferrous
N·m (lb ft) ± 10%
Non-Ferrous
N·m (lb ft) ± 10%
Ferrous
N·m (lb ft) ± 10%
Non-Ferrous
N·m (lb ft) ± 10%
M8 x 1
10.5 (7.7) 6.3 (4.6) 8.5 (6.3) 5 (3.7)
M10 x 1 21 (15.5) 12.5 (9.2) 15.5 (11.4) 9.3 (6.9)
M12 x 1.5 37 (27.3) 22 (16.2) 27 (19.9) 16 (11.8)
M14 x 1.5 47 (34.7) 28 (20.7) 37 (27.3) 22 (16.2)
M16 x 1.5 58 (42.8) 35 (25.8) 42 (31) 25 (18.4)
M18 x 1.5 74 (54.6) 44 (32.5) 47 (34.7) 28 (20.7)
M22 x 1.5 105 (77.4) 63 (46.5) 63 (46.5) 38 (28)
M27 x 2
178 (131.3) 107 (78.9) 105 (77.4) 63 (46.5)
M30 x 2 225 (166) 135 (99.6) 136 (100.3) 82 (60.5)
M33 x 2 325 (239.7) 195 (143.8) 168 (123.9) 101 (74.5)
M42 x 2 345 (254.5) 207 (152.7) 220 (162.3) 132 (97.4)
M48 x 2
440 (324.5) 264 (194.7) 273 (201.4) 164 (121)
M60 x 2 525 (387.2) 315 (232.3) 330 (243.4) 198 (146)
* S-Series connectors are used with O-Ring Face Seals (ORFS).
** L-Series connectors are used with 37° flare.
Torque values for metric O-Ring Boss (ORB) port plugs
Ferrous Non-ferrous
Metric
thread
Internal hex
N·m (lb ft) ± 10%
External hex
N·m (lb ft) ± 10%
N·m (lb ft) ± 10%
M8 x 1 8.5 (6.3) 10.5 (7.7) 6.3 (4.6)
M10 x 1 16 (11.8) 21 (15.5) 12.5 (9.2)
M12 x 1.5 23 (17) 37 (27.3) 22 (16.2)
M14 x 1.5 47 (34.7) 47 (34.7) 28 (20.7)
M16 x 1.5 58 (42.8) 58 (42.8) 35 (25.8)
M18 x 1.5
74 (54.6) 74 (54.6) 44 (32.5)
M22 x 1.5 105 (77.4) 105 (77.4) 63 (46.5)
M27 x 2 178 (131.3) 178 (131.3) 107 (78.9)
M30 x 2 225 (166) 225 (166) 135 (99.6)
M33 x 2 325 (239.7) 325 (239.7) 195 (143.8)
M42 x 2 345 (254.5) 345 (254.5) 207 (152.7)
M48 x 2 440 (324.5) 440 (324.5) 264 (194.7)
M60 x 2 525 (387.2) 525 (387.2) 315 (232.3)
51430129 15/12/2017
20