Cascade X2000 Use And Care Manual Download Page 3

Page: 3 / 31

Please retain this manual for future reference

Congratulations on your purchase of a new grill! We are

very proud of our product and we are completely

committed to providing you with the best service

possible. Your satisfaction is our #1 priority.

Please read this Use & Care Manual very carefully. It

contains valuable information on how to properly

maintain your new grill.

We know you’ ll enjoy your new grill and thank you for

choosing our product. We hope you consider us for

future purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating

instructions for your model. Use your grill only as

instructed in this manual. These instructions are not

meant to cover every possible condition and situation

that may occur. Common sense and caution must be

practiced when installing, operating and maintaining any

appliance.

Please record your model and serial numbers below for

future reference. This information is found on the serial

plate located on the inside of the grill door.

NOTE: Use only soap and water to clean serial plate.

Model Number: ______________________________

Serial Number: ______________________________

Purchase Date: ______________________________

Gas Type: __________________________________

Please complete and mail in the

Product

Registration Card

included with your grill.

Questions?

1-800-229-5647

for written inquiries:

Sure Heat Manufacturing

3130 Moon Station Rd

Kennesaw, GA 30144

Please attach sales receipt here for

future reference.

Register Your Product

The PRODUCT REGISTRATION CARD
should be filled in completely, signed
and returned to Sure Heat Manufacturing.

Assembly

Welcome & Congratulations

Summary of Contents for X2000
































Search results

Summary of Contents for X2000

Reviews:

Related manuals for X2000

Brands by name

Popular brands

Cascade X2000, Use And Care Manual

Search results

Summary of Contents for X2000

Reviews:

Related manuals for X2000

Brands by name

Popular brands