background image

Warning:

   

-

 

Do not plug into extension cords, power strips, outlet timers, surge protectors, or multioutlet extensions of any 

type 

-

 

Do not operate the unit near flammable items or in environments where flammable fumes may be present 

-

 

For outdoor use only. 

-

 

This heater is not intended for indoor use. Do not use the heater in reach of a shower, bathtub, sink, or a swimming 
pool. 

-

 

Do not immerse the unit, plug, or power cord in water or other liquids. 

-

 

Do not kink the power cord when storing or while in use. 

-

 

Do not run the power cord under carpets or rugs. 

-

 

Place the unit on a hard, level surface when operating. Do not operate the unit on soft or uneven surfaces as it 

could cause the unit to fall over and cause damage and/or injury. 

-

 

This heater includes tip over protection – this protection will shut the unit off if it tips over to reduce the risk of 
fire. If the unit shuts off due to tip over, unplug the unit and stand it upright, allow the unit to cool for 15 minutes. 

If the halogen heating bulb shatters, do not operate the unit. If the bulb is in good working condition, plug it back 

into a 120V wall outlet to reset the unit and begin operation again. 

-

 

Do not attempt to take the unit apart. 

-

 

Two dark areas may exist on the surfaces of the heating elements during the first few minutes after the unit is 

turned on. This is normal and will not affect the performance of the unit. 

-

 

Never leave the unit unattended when it is operating. 

-

 

Use only with 120V electrical outlets 

-

 

Do not operate the unit if the power cord is damaged. 

-

 

Do not allow children or anyone unfamiliar with these directions to operate the unit. 

-

 

Keep the heater and its power cord away from children. 

-

 

The top of the heater will become very hot during operation. Do not touch the top of the heater while it is operating 

or immediately after powering off. Allow the unit to cool for at least 15 min before touching the head of the heater.   

Failure to do so can cause serious and/or permanent bodily injury. 

-

 

Do not insert foreign objects into the protective cage surrounding the halogen heating bulb. 

-

 

Keep the unit at least four (4) feet away from walls, curtains, flags, furniture, and other objects while in use. 

-

 

The top of the unit should be at least two (2) feet from a ceiling or overhang. 

-

 

Before storing or moving the unit first unplug and then allow it to cool for at least 15 minutes. 

-

 

Do not place any foreign objects on the top of the heater. The top of the heater will become hot during operation. 

-

 

Do not touch the top of the heater or the protective metal cage while it is in use. Unplug and allow the unit to cool 

for at least 15 minutes before touching. 

-

 

Do not operate the unit near sprinklers, fountains, or in the rain. 

-

 

Do not attempt to repair or adjust any electrical or mechanical components. 

-

 

To further reduce the risk of tip over, do not operate the heater in windy conditions. 

-

 

Do not use the heater to dry clothing. 

-

 

WARNING: make sure that the unit is completely OFF before leaving it unattended   

-

 

Do not overtighten screws needed for assembly. Overtightening the screws can strip the head of the screws which 

prevent proper assembly. 
 

 

Summary of Contents for PH-2020









Reviews: