Cascade CMX Pro, Owner'S Manual

Page: 24 / 32

Page | 25
MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE
MAINTENANC
MAINTENANC MAINTENANC
MAINTENANCE
E E
E INST
INST INST
INSTR
R R
RU
U U
UC
C C
CTIONS
TIONS TIONS
TIONS
Helpful Hints
The safety level given by the design of this equipment can only be
maintained when the equipment is regularly examined for
damage and wear. Inoperable components should be replaced
immediately or the equipment should be put out of use until it is
repaired. Read all maintenance instructions thoroughly before
beginning work.
All references to the right or left side and to the front or back are
made as if you were on the exercise equipment ready to exercise.
For example, the belt is on the right side of the bike.
INITIAL SERVICE
Upon receiving your equipment, use a soft clean cloth to wipe
off the dust that may have accumulated during shipping. Your
equipment will need minor assembly. Refer to the “Assembly
Instructions” section of this manual for details.
MAINTANCE SCHEDULE
Part Recommended
Action
Frequency Cleaner 2 Lubricant 2
Pedals1
Ensure that the
pedals are tight in
crank arms and not
cross- threaded, all
screws on pedals are
tight, and pedal
straps are not frayed
Before each
use
N/A N/A
W
W W
WARNIN
ARNIN ARNIN
ARNING
G G
G: WHEN USED IN A CLUB SETTING IT IS CRITICAL THAT THE PEDALS BE
CHECKED AFTER EACH CLASS TO ENSURE PROPER INSTALLATION. FAILURE TO DO
SO MAY RESULT IN PROPERTY DAMAGE AND/OR RIDER INJURY. TORQUE PEDALS TO
47 Nm (35 FT-LB)