Cascade 402013, Instruction Manual

Page: 6 / 28

1. Attach the Front Stabilizer
1-1. Remove the cardboard tube from the front end stabilizer bracket
Loosen the two •
M10 x 20mm Allen Head Bolt (J6)
from the
cardboard tube and remove the cardboard tube.
The cardboard tube is used for packaging protection purposes, which won’t be •
used again during the assembly.
FIXINGS: FIXINGS:
x
2
Part
No.
J6
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Make sure the moving wheels
on the front stabiliser face out
after assembly.
!
FIXINGS: FIXINGS:
x
4
Part
No.
J6
1-2. Attach the Front Stabilizer
Attach the •
Front Stabilizer (B)
to the
Main Frame (A)
with four
M10 x 20mm Allen Head Bolt (J6)
and tighten these bolts with
the 6mm Allen Key.
FIXINGS: TOOLS:
FIXINGS: TOOLS:
6
J6
Cardboard Tube
J6
Please lubricate the fastenings before assembly
by applying some of the “multi-purpose grease”
to each bolt shaft.
LUBRICATE BEFORE ASSEMBLY
cascadehealthandfitness.com