Thank you for purchasing
the
CASCADE MAGPlus trainer.
Please read
the following directions thoroughly before use.
Model:
37310
CASCADE MAGPlus
trainer
Contents: 1 pc trainer and 1 pc quick release skewer
CAUTION
1.
Please read and follow all instructions before using the trainer.
2.
This trainer is intended for single-rider bicycles only.
*shown with optional riser
3.
Before riding make sure that both legs of the trainer are fully extended away from the frame assembly.
4.
Before riding,
be sure
the bicycle is correctly installed and securely locked into the trainer as explained in the
instructions.
5.
Do not touch
the resistance unit during use and for a period of time after use until it has had sufficient time
to cool down. The resistance unit can become hot enough to cause burns.
6.
Keep
children, pets and all items safely
away
from the trainer during use.
7.
Always use the trainer on a flat surface.
8.
Always consult a doctor before beginning any exercise routine or using any exercise or fitness product.
Should you become ill, feel dizzy, light-headed or nauseous while riding the trainer, stop riding immediately and
seek medical attention.
WARNING
Read and follow all instructions concerning installation
of the bicycle on the trainer. Failure to securely attach
the bicycle to the trainer could result in serious injury
to the rider or those near the trainer.
BIKE MOUNTING INSTRUCTIONS
1.
Replace the bicycle’s rear wheel quick release (QR) skewer with the one provided. See the bicycle owner’s
manual for instructions on how to properly adjust the QR skewer. Make sure the QR skewer is tight and your
wheel is aligned properly on the bicycle.
2.
Rotate both the
Release Clamp
and
Adjustment Knob
(with the associated
locking rings
) counterclockwise,
moving them away from the center of the trainer. The
release clamp
should remain in the locked position as
shown in the Figure 1.
17280 Woodinville-Redmond RD NE
Suite 800
Woodinville WA 98072
425.402.4062
cascadehealthandfitness.com
