Cascade Sciences CVO-10, Installation & Operation Manual

Page: 19 / 56

19 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
I
NSTALLATION
P
ROCEDURE
C
HECKLIST
For installing the oven in a new workspace location.
Pre-Installation

Verify a vacuum supply source suitable for your application is available and
can be connected to the oven, page Error! Bookmark not defined. .
•
See page 25 for the oven gas and vacuum port locations.

Check that the required ambient condition for the unit are met, page 20
•
Unit dimensions may be found on page 5

Check that a suitable power supply for the oven is present, page 21
Installing the Oven

Review the lifting and handling instructions, page 22

Install the leveling feet, page 23

Install the oven in its workspace location, page 23
Set up the Oven for use

Clean the oven chamber and shelving if needed, page 23

Install the shelving in the oven chamber, page 24

Connect the vacuum supply to the oven, pages 25 and 26

Optional: Connect the oven to a neutral purging gas. See page 27