13
6892487-R3
CL0271.eps
CL0221.eps
CL0273.eps
LOAD HANDLING – TURNALOAD
™
CLAMP
A) Drive forward, pick up load .
Top Arm
Pick up empty pallet with top arm,
rotate 180 ° to position pallet on top.
Top Arm
4 in.
(10 cm)
WARNING:
If load is short
and does not clamp firmly
against top pallet, withdraw
from load and reposition top
arm as follows:
B) Raise load to
clamp against
top pallet.
Check
clearance
Top Arm
Rotate 180°
Adjust arm
Rotate 180°
and reclamp
CLAMPS WITH TOP ARM SHUTOFF
CL0271.eps
CL2486.eps
CL2485.eps
LOAD HANDLING – TURNALOAD
™
CLAMP
A) Drive forward, pick up load .
Top Arm
Pick up empty pallet, rotate 180°
to position pallet on top.
Top Arm
Bottom
Arm
Rotate 180°
Adjust arm
Rotate 180°
and reclamp
4 in.
(10 cm)
WARNING:
If the bottom
pallet cannot be picked up
because the lower forks are
to high, reposition the bottom
arm as shown.
B) Clamp load.
Check
clearance
CLAMPS WITH BOTTOM ARM SHUTOFF
IMPORTANT:
Positioning the bottom arm
outside the width of the frame will reduce
frame end damage from dragging on floor.
Summary of Contents for Bulk Box Handler Series
Page 21: ...BLANK...