Mode 1 can be used for warming the cool work piece
or drying a varnished surface etc. after switching the
hot air gun on let, it run for a minute or
two before operating.
During work operation:
• Eensure that you allow break intervals while working
with the hot air gun to avoid overheating.
• Avoid mechanical damage
• Keep away from flamable liquids and flamable
materials.
• Do not block the ventilation lots in the housing
• Once you are fininshed with the machine,
unplug from mains.
After work:
• Switch off the machine and disconnest the cable
from the mains
• Clean the machine and accessories
• Store the machine in a dry place
Mainternance:
• This tool does not require any special technical
maintenance.
Safety instruction when working with a hot air gun:
• Wear individual protection equipment if necessary
(gloves, protective shoes, goggles, etc.) accrding to
the work you have to do.
• Unplug the machine when it is not in use, when
changing nozzles or for any maintenance.
• Work in a clean and uncluttered area
• Always keep a stable and sure position when work-
ing. your work area should be correctly lit.
Summary of Contents for HAG2000A
Page 6: ...R1200E ...
