Casals CPLI14K2, Manual

Page: 6 / 84

- Always check the workpiece before
operation and remove any obstructions such
as nails, staples, screws, string, rags, cloths
and other debris.
- Only use the appliance for carrying out dry
tasks.
- Do not use the appliance on any part of the
body of a person or animal.
- Let the appliance running with no load for
30 seconds in a safe position. If you notice
serious vibration or other defects stop the
appliance immediately. Then check the
problem and /or proceed as we describe on
Anomalies and Repair clause.
- The appliance can be used on surfaces such
as: wood, cardboard, plastic, plaster, etc.
Product description and Specifications
Description
1 Keyless chuck
2 Torque adjustment ring.
3 Cooling vents
4 Soft grip
5 Power light
6 Forward/reverse switch
7 On / Off / speed adjustment switch
8 Battery release button
9 Battery
10 Function ring
11 Charger
12 Gear Selector
13 Belt Holder
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
6
Screwdriver safety warnings
- Hold the power tool by insulated
gripping surfaces, when performing
an operation where the fastener may
contact hidden wiring. Fasteners
contacting a “live” wire may make exposed
metal parts of the power tool “live” and
could give the operator an electric shock.
Additional safety warnings
-CAUTION: In order to prevent
overheating do not cover the appliance.
-Ensure that neither the air access nor
exit become either totally or partially
covered by drapery, clothing, etc., as this
increases the risk of fire.
- Do not use the battery charger if the
cable or plug is damaged.
- Ensure that the voltage indicated on the
charger rating label matches the mains
voltage before plugging in the charger.
- Connect the battery charge to a socket
that can supply a minimum of 10 amperes.
- Only use the appliance with the specific
electric connector provided.
- If any of the appliance casings breaks,
immediately disconnect the battery
charger from the mains to prevent the
possibility of an electric shock.
- Do not use the appliance if it has fallen
on the floor, if there are visible signs of
damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance
near water.
- Do not use the appliance with damp
hands or feet, or when barefooted.
- Do not clip or crease the power cord.
- Do not allow the power cord to hang or
to come into contact with the hot surfaces
of the battery charger.
- Check the state of the power cord.
Damaged or tangled cables increase the risk
of electric shock.
- Do not touch the plug with wet hands.
- Use clamps or a vise to secure the object to
be worked in place. The work will be safer if
both hands are free to control the tool.
- Do not touch any of the appliance’s moving
parts while it is operating.
- Fully unroll the appliance’s power cable
before each use.
- Keep hands and other body parts well away
from the work area whist the tool is in use.
- Do not use the appliance if its accessories
are not properly fitted.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Disconnect the appliance from the mains
when not in use and before undertaking any
cleaning task.
- This appliance is for household use only,
not professional, industrial use.
- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance is not a toy. Children should
be supervised to ensure that they do not play
with the appliance.
- Do not store the appliance on areas where
the temperature could be lower than 2ºC
- Do not expose the appliance to extreme
temperatures.
- Do not expose to extreme temperatures or
strong magnetism.
- Keep the appliance in a dry, dust-free
place, out of direct sunlight.