Casals CGG3620, Instructions For Use Manual

Page: 8 / 40

Place a piece of paper or cardboard
underneath the product to catch hot glue drops
and prevent damage to the underlying surface.
Do not apply more hot glue than is needed for
your application.
Use the glue gun in a well-ventilated area to
avoid breathing hot glue vapors.
Do not tilt the glue gun nozzle upwards or use
the product to glue overhead items.
Always allow hot glue to cool down and dry
completely before handling the item to which it
is applied.
Do not insert anything except glue sticks into
this product, and insert only from the back of
the glue gun.
Do not touch the plug with wet hands.
Do not use the appliance if the cable or plug is
damaged.
Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
Avoid all contact with the liquid that could be
released from the battery. In case of contact
with eyes, wash them thoroughly and seek
medical advice. The liquid spilled from the
battery may accuse irritation or burns.
Do not store or use the appliance outdoors.
Unplug the appliance from the mains when not
in use and before undertaking any cleaning
task.
Do not place inflammable material near the
appliance.
Do not use the appliance on any part of the
body of a person or animal.
SERVICE
Any misuse or failure to follow the instructions
for use renders the guarantee and the
manufacturer’s liability null and void.
PRODUCT DESCRIPTION
AND SPECIFICATIONS
DESCRIPTION
A Nozzle
B Feed Trigger
C Tool Rest
D Charging indicator light
E Heating indicator light
F Switch button
G Charging point
H Glue stick inlet
I Glue sticks
J USB charging cable
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTALLATION
CHARGING THE BATTERY
Caution: A new battery is not fully charged
and must therefore be charged before the
appliance is used for the first time.
Plug the USB charger into an USB power
supply.
Connect the other side of the charger
to the
charging port using the socket on the product.
The charging indicator will light red.
When the battery is charged, the charging
indicator will light green. Disconnect the
charger from the mains supply.
NB: Do not use the appliance while it is
connected to the charger.
It takes approximately 3 hours to do a full
charge of the battery.
INSTRUCTIONS FOR USE
BEFORE USE:
Remove the appliance’s protective film.
Make sure that all the product’s packaging has
been removed.
Inserting glue sticks
This glue gun uses standard 7mm diameter
glue sticks.
Make sure the glue gun is in the OFF position.
(Heating indicator light is off)
Insert a glue stick through the inlet at the back
of the glue gun.
Push the glue stick into the glue chamber until
it won’t go any further.
Switch action
Press and hold the switch button for 2-3
seconds to turn on the glue gun.