3. COMPONANTS:
1. Wheels
2. Tube
3. Front Handle
4. Hole for belt hook
5. ON/OFF switch
6. Housing
7. Blow/Vacuuming selector switch
8. Collection Bag
4. Use and care:
4.1. Assembly:
1)Slide the upper tube into the motor housing, then
tighten the screws and make sure the tube is firmly fixed
with motor housing.
2)Insert lower tube into upper tube and push them un-
til they are connected firmly together then tighten the
screws.
3) Assemble the wheels to the lower tube as following
picture shows.
4)Attach the collection bag to the hook on bottom tube
(a) and the outlet on the bottom of motor housing (b).
4.2. Before Use:
4.2.1. Before using the blower vac, check the supply
and extension cord for signs of damage and aging. Do
not use the blower vac if the cord is damaged or worn.
4.2.2. Never operate the blower vac with defective
gaurds or shields, or without safety devices, for exam-
ple debris collector in place.
4.3. Operation:
Before stating the machine, make sure that the blower/
vac is completely assembled, that the collection bag is
fitted and the shoulder harness is adjusted to a suitable
working position.
Switching on and off
•To switch on, press and hold the ON/OFF switch to
turn the blower/vac on.
•Release the ON/OFF switch to turn the blower/vac off
2
a
b
1
6
3
4
5
7
8
ON
OFF
