Always check that the power supply
corresponds to the voltage on the rating
plate.
The machine is double insulated in
accordance with IEC60335; therefore no
earth wire is required.
Replacing cables or plugs
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
Using extension cables
Only use an approved extension cable suitable for
the power input of the machine. The minimum
conductor size is 1.5 mm2. When using a cable
reel always unwind the reel completely.
3 Mounting accessories
Dust blower function
Fig. A + B
•
Attach the nozzle (5) to the outlet. (1)
•
Turn the nozzle (5) clockwise to lock it in place.
Dust suction function
Fig. A + C
•
Attach the nozzle (5) to the suction port. (4)
•
Attach the dustbag (6) to the outlet. (1)
After use, always empty the contents of the dust
bag in a dust bin. Open the zip to release the dust
from the dust bag.
4. Operation
Starting and stopping the machine.
Fig. A
The On/Off switch
•
Switch the machine on by pressing the
on/off switch (2).
•
Release the on/off switch (2) will turn
the machine off.
Switch-lock
•
Lock the On/Off switch by pressing the on/off
switch (2) and then pressing the lock on button (3).
•
Release the switch-lock by pressing the on/off
switch (1) shortly.
5. Service & maintenance
Disconnect the machine from the mains,
if you must carry out cleaning or
maintenance work on the machine.Risk
of electric shock!
The machine has been designed to work over a
long period without problems and with minimum
maintenance requirements. You can extend the
service life of your machine by cleaning it regularly
and treating it professionally.
Replacing the carbon brushes - Fig. C
Remove and check the carbon brushes regularly.
They need to be replaced when they are worn
down to about 6mm or less. Keep the brushes
clean and free to slip in the holders.Always replace
both carbon brushes ate the same time.
•
Unscrew the carbon brush cap. (7)
•
Remove and replace the carbon brush.
•
Screw the carbon brush holder (7) back in position.
Cleaning
Clean the machine housing regularly with a soft
cloth, preferably after each use. Remove
persistent dirt with a soft cloth, dampened with
soap water. Do not use solvents, such as gasoline,
alcohol, ammonia, etc. Such materials damage
the plastic parts.
Lubricating
This machine does not need additional lubrication.
Environment
The machine is supplied in a robust packaging, in
order to prevent transport damages. The
packaging consists largely of recyclable material.
Summary of Contents for B500E
Page 6: ...R1200E...
