Casall INFINITY 1.2T, User Manual

Page: 47 / 57

Press the “MODE” button third, computer display screen figures will come back to scan status automatically
To pause the program while exercising, press the “STOP” button. To quit the program, press the “STOP
button” twice. At the end of the program when the target has been achieved, the computer will beep.
P1- TARGET TIME PROGRAM
Power on the computer, press the STOP/ENTER button, then the IWM will be flashing. Press the SPEED
UP/DOWN button to select the P1(Program 1) , then press the STOP/ENTER button again, computer will go
to P1 procedure
Weight setting
When the P1 display on the computer display screen dot matrix area, users press the STOP/ENTER button,
the figure”0.0” and the dot will be flashing that point at WEIGHT. Press the SPEED “UP /DOWN“ button to
input the weight and press the STOP/ENTER button to confirm.
Time setting
After inputting weight, press the STOP/ENTER button to confirm
After you have selected “P1-Target time program” press the “STOP/ENTER” button. The “TIME ”display will
show the time of “30:00”, press the SPEED “UP /DOWN“ button to adjust target time, then press the
“STOP/ENTER“ button to confirm the setting. Press the “START” button to begin the exercise program. To
increase or decrease the speed while exercising, press the SPEED “UP /DOWN“ button, The program will
count down from the defined target time, “DISTANCE and CALORIES” will count up from “0”.
All exercise figures will be displayed on the computer display screen when you start to do exercise, and the
figures will be scan automatically during exercise. And the initial speed will be 3.2KM/hr/2.0ML and the
incline will be at “0”
To switch the screen display while exercising, press the “MODE” button to switch the
“
( PROG. / DIST. ) ,
( PULSE / INCLINE ) , (CAL. / SPD. )
”
.
Press the “MODE” button first, the(PROG ) , ( PULSE ) , (CAL. ) will be shown on the computer display screen
and present all the time.
Press the “MODE” button second, the ( DIST. ) , ( INCLINE ) , ( SPD. )will be shown on the computer display
screen and present all the time
Press the “MODE” button third, computer display screen figures will come back to scan status automatically
The user may press SPEED UP or SPEED DOWN buttons to adjust the running speed.
The user may press INCLINE UP or INCLINEDOWN button to adjust the treadmill angle.
To pause the program while exercising, press the STOP button. To resume exercising, press the “START”
button, or press the STOP button again to return to POWER ON MODE.The time counts down at the end of
the program the computer will “beep”.