Casall INFINITY 1.2T, User Manual

Page: 43 / 57

POWER ON MODE
When the unit is switched on, “PRESS START TO QUICK START OR STOP/ENTER TO SELECT PROGRAM” will
display on the LCD. Press START to begin training in QUICK START MODE or STOP/ENTER to go into
PROGRAM MODE.
UNIT CONVERSION MODE – (KM / ML.)
Power on the treadmill, press and hold the START button then push up the safety key to switch on computer.
The console will STOP/ENTER into the UNIT CONVERSION MODE. The console will sound a BEEP and show
the current default setting KM (kilometres) or ML (miles). Use START to switch between KM and ML. Press
STOP/STOP/ENTER to confirm the selection and return to POWER ON MODE. The console will sound an
extended BEEP as it saves the new setting.
SLEEP MODE
When the power is on the computer will automatically enter SLEEP MODE if there is no movement for 3
minutes without receiving any input. Press any button to return to POWER ON MODE when the computer is
in the SLEEP MODE.
SAFETY KEY
The safety key must be inserted into the slot and press to turn up in order to operate the treadmill.
Always insert the safety key and attach the clip to your clothing at your waist before beginning your
workout. If you should encounter problems and need to stop the motor quickly, simply pull the cord to
disengage the safety key from the console. To continue operation turn the power switch to off, turn the
safety key to “on” position then turn the switch on again.
**Please do not operate the safety key as power switch of treadmill. Please must power off the treadmill
by turning power switch off after you finish workout. Please always set the safety key in “on ” potision
then switch on the treadmill by power switch.
QUICK START MODE
Press the START after power on the treadmill to start the Quick Start workout mode, when in QUICK START
MODE, the treadmill will countdown from 3 to zero and then the belt start at 1.0KM/H or 0.6ML speed.
The workout Time, Distance and approximate Calories figure will count up from 0. The running speed will
also display on screen. The user can press SPEED-UP and SPEED-DOWN button to adjust running speed,
and press INCLINE-UP and INCLINE-DOWN buttons to adjust the INCLINE level.
Press the STOP button to pause the program, and START to restart, or press STOP again to return to POWER
ON MODE.