9
ASSEMBLY STEPS
STEP 1
Attach the Front Stabilizer (pt.J-1) to the Main Frame (pt.F-1) using two Allen bolt (pt.P-7)
Attach the Rear Stabilizer (pt.K-1) to the Main Frame (pt.F-1) using two Allen bolt (pt.P-7).
STEP 2
1. Please remove four sets of the M8x16 Allen bolt (pt.D-5) and Flat Washer (pt.D-6)from
the Main Frame (pt.F-1)
2. Take the Handlebar post (pt.D-1) and pass it through the Handlebar post cover (pt.M-
18).
3.
Hold the Handlebar Post (pt.D-1) and connect the Lower Computer Cable (pt.H-14)
and the Upper Computer Cable (pt. D-2)
4. Slide the Handlebar Post (pt.D-1) into
the Main Frame then fix with four sets of M8x16
Allen bolt
(
pt.
D-5)
and Flat Washers (pt.D-6
)
.
M8*16L
4*
1*
K-1
Ø12*Ø19*1T
M8*16L
4*
1*
