Casada KENNEDY IV, Manual

Page: 19 / 27

36 37
installation
inst
alal
ti
O
n
inst
alla
ti
O
n
installation
• lift the backrest and let it drop into the seat mount. screw the
flat-head screws (a) to both sides (B) of the chair. (see sketch)
a. Flat-head screw (on the backrest)
B. Mount (on the seat)
07. AttAcHing tHe bAckreSt
Bevor
after
• Bring the flat-head rivet together with the connecting rod and
the support fork in the backrest, and attach both with a splint.
connect the cable which comes out of the backrest with the one
from the seat part. (see sketch)
a. connecting rod (on the backrest)
B. supporting fork (on the seat)
c. Flat-head rivet
d. splint
08.
cable
(Music)
09.
• remove the packaging material from the connections and in-
sert the plugs in the correct position in the seat according to the
markings. (see sketch)
10. AttAcHing tHe bAck AnD SeAt cuSHion
1. attach the back cushion using the
velcro and zipper on the backrest.
2. attach the neck cushion using the
velcro on the backrest.
• A separate back cushion to weaken the massa-
ge is already inserted into the backrest of the
chair. if you prefer a stronger massage, remo-
ve this beforehand.
11. bAck cuSHion