34
35
inst
alla
ti
O
n
installation
inst
alla
ti
O
n
installation
04.
• Repeat steps 2 and 3 for the installation of the other side parts.
02. connect tHe Air HoSeS
• Connect the air hoses on the
side parts to those on the seat.
(see sketch)
sidepanel
03. connect SiDe pAnelS
• Insert the armrests into the chair at a 90° angle. Then push the
mounting brackets (d) fully into the crossbar (c). (see sketch)
• Adjust the holes (A) in the side parts so that they are parallel
to the mount in order to screw them tightly to the frame. (see
sketch)
note:
Make sure the installation is done carefully in order to
prevent scratching
gasket ( 6 x 18 x 2)
spring washer ( 6)
hexagon head screw (M 6 x 55)
05. AttAcHing tHe reMote control
• Attach the control unit to
the correct position and
tighten the screws. (see
sketch)
06.
(a)
• Cut the cable ties which connect
the stopper with the backrest and
remove the packaging material
from the control panel of the back-
rest (both can be found under the
seat cushion).
Summary of Contents for KENNEDY IV
Page 1: ...Kennedy lV Bedienungsanleitung Manual ...
Page 26: ...50 51 Notizen Notes Notizen Notes ...
Page 27: ......
